​Sno Dolly is manually operated, lightweight (5lb. 6oz.), yet tough and powerful device made from high grade aluminum, high density polyethylene (HDPE) plastic and comes with a fiberglass pole handle and miscellaneous parts and hardware.

​Sno Dolly is built to transport and remove large amounts of heavy structured-collapsing snow from off a big, tall, flat and bowled roofs, trailers and docks. Sno Dolly will remove the snow fast, easily, safely and without the back breaking lifting, carrying and throwing suffered by shoveling the snow off one shovel full at a time.

​Sno Dolly collects large amounts of snow and transports the snow from any distance to the edge of the roof for discharge. Using a long expandable pole attached to the Sno Dolly, the operator pulls the Sno Dolly's assembly into and through the snow, loading the snow onto a retractable load bearing belt following the Sno Dolly, that can now be easily transported by pushing the loaded Sno Dolly across the roof surface and unload off roof from a safe distance to the edge. No lifting, just back and forth, pull and push.

Sno Dolly reduces exhausting, back breaking effort, increases safety and saves an incredible amount of time. ​​Sno Dolly does all that and more...

Benefits and Advantages:

• Remove Roof Snow Easier, Faster, Safer and Without Ever Lifting any Snow.
  
• Five Times Faster than Shoveling.
  
• Easily Transport Snow to Desired Drop Zones.
  
• Transport Snow Across Long Distances Over Snow, Around Corners and Up Inclines.
  
• Transport and Discharge 10 Sq. Ft. of Snow at a Time and Up to 1000 Sq. Ft. or More Per Hour.
  
• Remove Snow from Flat, Bowled and Pitched Roofs, Trucks, Trailers and Docks.
  
• Safe on all Roofs and Tough Enough to Carve Through Even the Toughest Snow Conditions Including Ice Crusted Snow.
  
• Allows Operator to Work from Safe Distance from Roof Edge (Up to 16 Feet from Roof Edge Depending on Pole Handle Adjustment)
  
• Strategically Light Weight, Weighs under 6 lbs. (Without Pole)

• Reduces Major Body Fatigue by Reducing Effort to Move Snow Long Distance and Eliminating the Lifting, Carrying and Throwing Required by Shoveling.
  
• Drastically Reduce Labor and Hazard/Risk Liability.
  
• Save or Make Big Money.​

Sno Dolly Description

Sno Dolly has a No Drop leading edge that protrudes beyond the side cutters to prevent the unit dropping over the edge of the building when loading at building perimeter.

Sno Dolly's "Sno Holder" utilizes a special bend in the load belts tail to prevent unintentional unloading of snow as well as aiding the load belt to easily travel back over snow and roof for unloading.

Sno Dolly has a "Sno Loc" device located at the top back edge of the unit body.

Sno Loc is made of the HDPE belt material. Sno Loc slides over snow while loading Sno Dolly, but when pushing back, Sno Loc stabs, grabs and holds the snow on Sno Dolly for transport until the Sno Loc releases the snow automatically during unloading.

Sno Dolly is safe, too! Load and unload snow at a safe distance from the roofs edge, as far back as 24 feet from edge, depending on pole handle length.

Sno Dolly also reduces strain, fatigue, abuse and back breaking damage to the body.

Sno Dolly was designed to remove a lot of snow off large, high roofs in a way more efficient, effective and less labor intensive. It does this remarkably well. I also discovered many other talents and capabilities Sno Dolly can perform as will each owner/operator will also as they discover and challenge their Sno Dolly.

Important Note:
Always mark with a sign and, or rope/tape area on ground for snow dumping designation PRIOR to clearing snow from roof to prevent any injuries to anyone on the ground below. 

Size & Weight Description: 

Total Weight: (less pole) 5lbs. 6 oz.

​Sno Dolly Body: 16" X 13" X 8 1/2" 

​Load Belt: 15 3/4" X 96" 

Load Weight: 100-300 lbs. depending on snow conditions and or roof pitch angle.

Packaging Dimensions: 16" X 12" X 10"

Pole Dimensions: 1 1/8" ID double wall at attachment tip.

Pole Options:

​6-12 Ft. Telescoping non-conductive fiberglass (Standard and Recommended where Electrical Hazards Exist)

​8-16 Ft. Telescoping non-conductive fiberglass (Optional and Recommended where Electrical Hazards Exist)